Control Buttons And Indicator Leds - Datalogic Magellan 9800i Quick Reference Manual

Figure 6. Control Buttons and Indicator LEDs
1
Scale Zero Button
With all weight removed from the
scale, push this button to set the scale
to zero.
2
Manual EAS Deactivation Button
When in EAS Manual Deactivation
Mode, push this button to deactivate
an item.
3
ScaleSentryOverride Button
When configured to do so, a push of
this button will override a detected
scale overhang condition.
4
Scale Indicator LED (Yellow)
This LED indicates scale functions.
See the Indicator Table for more infor-
mation.
EAS Indicator LED (Red/Green/
5
Orange)
This LED indicates EAS functions with
red, green OR orange color. See the
Indicator Table for more information.
a. Some audible indications are configurable to be on or off, as well as offer their own pro-
grammable options for pitch, volume, etc.
8
1
2
3
6
ScaleSentry Indicator LED (Red)
This LED indicates the current ScaleSentry condition. See
the LED and Beeper Indications section for more informa-
tion.
7
Speaker
Sounds
indicate good read, ScaleSentry alert, system error and
other conditions.
8
Scanner Control Button
-If the scanner is "asleep", press this button to wake it up.
-Press this button momentarily to enter beeper volume
-Press this button between 1 and 4 seconds to enter beeper
-Press this button between 5 and 9 seconds to enter Scan-
-Press this button for 10 seconds to initiate a soft reset.
9
Camera Button
This button is used to take pictures with the Top Down
Reader (TDR) when images are captured to a microSD
card. See the PRG for details about this option.
10
eCommerce Button
If an optional TDR is configured so, press this button to
place the scanner in eCommerce state. Bar code(s) can be
read by the E-commerce Reader while in this state.
4
8
5
6
7
10
a
beeps, error tones and other audible signals to
change state. Select one of five volume settings.
tone change state.
ner Diagnostics Mode.
9
TM
Magellan 9800i