Interface Type - Datalogic Magellan 3450VSi Product Reference Manual

Interface Type

USB K
•
•
•
•
•
•
•
Interface Type
Specifies the current scanner interface. To access a scanner's interface identifi-
cation number, place the scanner in Scanner Diagnostic Mode and view the 7-
segment FRU display (reference
information).
NOTE
Selections are:
INTERFACE (I/F)
TYPE
RS-232 Standard
RS-232 Wincor-Nixdorf
RS-232 Single Cable
USB OEM
USB Keyboard
USB-TEC
USB COM
56
F
EYBOARD EATURES
Keyboard Layout on page 88
USB Keyboard Country Mode on page 88
USB Keyboard Caps Lock State on page 91
No Keyboard Support on page 92
USB Keyboard Send Control Characters on page 93
Quiet Interval on page 94
USB Keyboard Intercharacter Delay on page 95
INTERFACE SELECTION
The correct interface cable is generally included for the reader interface
type you ordered.
I/F I.D.
NUMBER
If the scanner's interface type must be changed, always be sure
that interface configuration is the FIRST item scanned during a
programming session. (Selecting an interface type resets ALL
other configuration items to the factory default for that inter-
NOTE
face type.)
Great care should be taken to select the correct interface type,
since you can cause damage to the scanner and/or POS termi-
nal by attempting to change to an incompatible interface.
ALWAYS make interface selections with the host cable DIS-
CAUTION
CONNECTED.
When an interface is selected, the scanner loads the configura-
tion for that interface as the selection is made. Any custom
configurations done in the previous interface will not be carried
over to the configuration for the new interface.
NOTE
starting on page 88
Chapter 2, Scale Diagnostic
05
12
20
45
35
0D
47
Mode, for more
Magellan™ 3450VSi