Code 39 Check Character Transmission - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode

Code 39 Check Character Transmission

Enables/disables transmission of optional Code 39 check character.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
008A01(CR)
Code 39 Check Character Transmission = Enable
186
This item is ignored when the advanced feature, Full Label Edit, is
enabled.
NOTE
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Code 39 Check Character Transmission
008A00(CR)
Code 39 Check Character Transmission = Disable
DEFAULT
Magellan™ 3450VSi