Enter/Exit Programming Mode
No Keyboard Support
Enables the scanner to perform host communications normally performed by an
attached keyboard.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
028901(CR)
No Keyboard Support = Enable
92
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
No Keyboard Support
028900(CR)
No Keyboard Support = Disable
Magellan™ 3450VSi