Code 39 Length 2 - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode

Code 39 Length 2

If Code 39 Length Control is set to Fixed-Length decoding, this feature speci-
fies Code 39 second fixed length. If Code 39 Length Control is set to Variable-
Length decoding, this feature specifies the maximum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the bar code,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
192
When in Fixed Length mode, if Length 2 is set to the value of 00,
then only Length 1 will apply
NOTE
Set Code 39 Length 2 on page 192
to cover any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
that represent the desired label length. The selectable range for this
option is 00, no second fixed length, or 01 to 50. Pad all single digit num-
bers with a leading zero to yield a two-digit entry (00-50).
gramming Mode bar code.
Alpha-Numeric Keypad in Appendix C
04B3(CR)
Set Code 39 Length 2
Default setting for this feature = 32 (length = 50)
Code 39 Length 2
below. You'll need
Magellan™ 3450VSi