Good Read Beep Frequency
Good Read Beep Frequency
Adjusts the scanner's good read beep to sound at low, medium, or high fre-
quency (controls the beeper's pitch/tone).
•
•
•
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
001401(CR)
Good Read Beep Frequency = Medium
Product Reference Guide
Low
Medium
High
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
001400(CR)
Good Read Beep Frequency = Low
DEFAULT
001402(CR)
Good Read Beep Frequency = High
29