Microsd Card Removal; Autorun File Processing - Datalogic Magellan 3450VSi Product Reference Manual

Autorun File Processing

CAUTION
6. If installed properly, you should immediately hear an audible signal upon

microSD Card Removal

1. Push in gently using your finger or thumbnail to disengage and remove the
2. Reconnect all cables which were disconnected earlier.
Autorun File Processing
After insertion of the card, the scanner will mount the microSD card and search
for the file "
ASCII strings "
ending of the file.
If the validation pattern is found, the file may contain any of the following com-
mands. The scanner will parse the file taking action according to these com-
mands. Filenames in
Example AUTORUN.DLS file:
326
The microSD card slot is spring loaded. Keep your finger lightly in place
atop the card until you are sure it is fully seated in place. See the illus-
tration on the following page.
Use your finger or thumbnail to push in on the top edge of the card to
be slightly below flush with the scanner enclosure when inserting or
removing the card. This will engage/disengage the spring mechanism.
Never insert tools or other foreign objects into the microSD card slot.
insertion or removal of a microSD card. Various operations will also be
indicated by the scanner's good read LED.
microSD card. Remember to keep your finger in place atop the card's edge
to avoid accidentally "launching" the card from the spring-loaded slot.
AUTORUN.DLS
" and "
$START$
this format
$START$ (required)
CONFIG, FILENAME.TEX
DUMPSTATS, FILENAME.TXT
DUMPCFG, FILENAME.TEX
LOADSW, FILENAME.BIN
$END$ (required)
". Embedded in that file is a validation pattern of the
" located at the respective starting and
$END$
specify a user-defined name.
Magellan™ 3450VSi