From microSD Card to Scanner
Application code load to scanner
By AUTORUN.DLS file
1. Generate a text file by any text editor as follows and save it as
RUN.DLS
2. Step 2: Save or copy file
application code (example
3. Insert the microSD card into the scanner.
4. Upon scanner audio indication of completion, the application code
APP1.BIN
Configuration load to scanner
By Autorun file
1. Generate a text file by any text editor as follows and save it as
RUN.DLS
2. Save or copy the autorun.dls file, and copy the CPLD code (example
CFG1.TEX
3. Insert the microSD card into the scanner.
4. Upon scanner audio indication of completion, configuration
CFG1.TEX
Product Reference Guide
$START$
LOADSW,R96-APP1.BIN
$END$
is loaded to the scanner. Typically, this takes about 45 seconds.
$START$
CONFIG,R96-CFG1.TEX
$END$
) to the microSD card.
is loaded to the scanner.
From microSD Card to Scanner
to microSD card and copy the
AUTORUN.DLS
) to the microSD card.
R96-APP1.BIN
AUTO-
R96-
AUTO-
R96-
R96-
329