Qr Code Length Control; Configuring Variable Length Decoding - Datalogic Magellan 3450VSi Product Reference Manual

QR Code Length Control

QR Code Length Control
Fixed Length Decoding —
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
ner will decode a ar code if the label length falls in the range of the configurable
minimum and maximum length.
Configuring Fixed Length Decoding:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the ENTER/EXIT Programming Mode bar code.
4. Set Length 1 to the first fixed length using the
5. Set Length 2 to the second fixed length (or to '0000' if there is only one

Configuring Variable Length Decoding:

1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the ENTER/EXIT Programming Mode bar code.
4. Set Length 1 to the minimum length using the
5. Set Length 2 to the maximum length using the
DEFAULT
03D901(CR)
QR Code Length Control = Fixed Length
Product Reference Guide
When fixed length decoding is enabled, the scanner
Programming Instructions on page 272
fixed length) using the
tions on page 272.
Programming Instructions on page 272
2 Programming Instructions on page
When variable length decoding is enabled, the scan-
that follow this page.
QR Code Length 1, Length 2 Programming Instruc-
that follow this page.
272.
03D900(CR)
QR Code Length Control = Variable Length
Enter/Exit Programming Mode
QR Code Length 1, Length 2
QR Code Length 1, Length 2
QR Code Length 1, Length
271