Enter/Exit Programming Mode
EAN-8
EAN-8 Enable
Enables/disables the ability of the scanner to decode EAN/JAN-8 labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
02D201(CR)
EAN-8 = Enable
132
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
02D200(CR)
EAN-8 = Disable
DEFAULT
EAN-8 Enable
Magellan™ 3450VSi