Usb Interface Selection - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode

USB Interface Selection

Remember to cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
00010D(CR)
Interface Type = USB TEC
58
Great care should be taken to select the correct interface type,
since you can cause damage to the scanner and/or POS termi-
nal by attempting to change to an incompatible interface.
ALWAYS make interface selections with the host cable DIS-
CAUTION
CONNECTED.
Single cable installations require connection at the POS Termi-
nal (host) port.
NOTE
USB Interface Selection
000145(CR)
Interface Type = USB OEM
000147(CR)
Interface Type = USB COM
Magellan™ 3450VSi