Object Sense Control - Datalogic Magellan 1500i Product Reference Manual

Object Sense Control

Object Sense Control
This feature controls the illumination idle. It determines whether the main illu-
mination is controlled by the Object Sensing system, or alternatively, stays con-
tinuously on.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
02FD00(CR)
Object Sense Control =Disable
Product Reference Guide
= Illumination is controlled by using Object Sense
Enable
= Normal illumination is used but it goes off during sleep mode /
Disable
disable mode
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
Enter/Exit Programming Mode
02FD01(CR)04EA40(CR)04CD09(CR)
Object Sense Control = Enable
43