DataBar Omnidirectional/EAN-128 Emulation
DataBar Omnidirectional/EAN-128 Emulation
Enables/disables the ability of DataBar Omnidirectional to be transmitted as
EAN-128.
1. To set this feature:
2. Scan the ENTER/EXIT Programming Mode bar code.
3. Scan either the enable or disable bar code below. You'll need to cover any
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
04D401(CR)
DataBar Omnidirectional/EAN-128 Emulation = Enable
Product Reference Guide
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
04D400(CR)
DataBar Omnidirectional/EAN-128 Emulation =
Disable
167