Enter/Exit Programming Mode
UPC/EAN Stitch Exact Label Halves
This setting enables the stitching of exact UPC-A/EAN-13 label halves with no
overlapping characters.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
054101(CR)
UPC/EAN Stitch Exact Label Halves = Enable
148
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
UPC/EAN Stitch Exact Label Halves
054100(CR)
UPC/EAN Stitch Exact Label Halves = Disable
Magellan™ 3450VSi