Handheld Data Format Requirements General
Datalogic Handheld Data Format Requirements
The following sections describe label transmission formats that are typically
observed in factory configurations of Datalogic handheld scanners.
GS1 DataBar Omnidirectional
•
•
•
•
•
GS1 DataBar Expanded
•
•
UPC-A
•
•
•
•
UPC-A with 2-Digit Supplemental
•
•
•
•
•
UPC-A with 5-Digit Supplemental
•
•
•
•
UPC-E
•
•
•
•
UPC-E with 2-Digit Supplemental
•
•
332
Prefix must be ASCII characters 'R4'
Check character must be included in label
Application identifier "01" must follow the prefix and preceed the base
label
Label length excluding prefix characters must be 16 characters.
Example: 'R40101044123456789'
Prefix must be ASCII characters 'R4'
Check character must be included in label
Number system must be included in label data.
Check digit must be included in label data and is assumed to be correct.
Prefix must be an ASCII character 'A' - total length including prefix must
be 13.
Example: 'A060992011187'.
Number system must be included in label data.
Check digit must be included in label data and is assumed to be correct.
Supplemental data is appended to base label.
Prefix must be an ASCII character 'A' - total length including prefix must
be 15.
Example: 'A06099201118712'.
Number system must be included in label data
Check digit must be included in label data and is assumed to be correct
Prefix must be an ASCII character 'A' - total length including prefix must
be 18
Example: 'A06099201118712345'
Number system must be included in label data
Check digit must be included in label data and is assumed to be correct
Prefix must be an ASCII character 'E' - total length including prefix must be
9
Example: 'E09988750'
Number system must be included in label data.
Check digit must be included in label data and is assumed to be correct.
Magellan™ 3450VSi