Codabar Stitching - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode

Codabar Stitching

Enables/disables stitching for Codabar labels. When parts of a Codabar bar
code are presented to the scanner with this feature enabled, the bar code parts
will be assembled by the scanner's software, and the data will be decoded if all
bar code proofing requirements are met.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
06AD01(CR)
Codabar Stitching = Enable
228
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
06AD00(CR)
Codabar Stitching = Disable
Codabar Stitching
Magellan™ 3450VSi