Upc/Ean Guard Insertion - Datalogic Magellan 3450VSi Product Reference Manual

UPC/EAN Guard Insertion

UPC/EAN Guard Insertion

This setting enables the insertion of either a missing leading or trailing guard
to a scanned bar code.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
054001(CR)
UPC/EAN Guard Insertion = Enable
Product Reference Guide
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
054000(CR)
UPC/EAN Guard Insertion = Disable
147