Enter/Exit Programming Mode
MSI Stitching
Enables/disables stitching for MSI labels. When parts of an MSI bar code are
presented to the scanner with this feature enabled, the bar code parts will be
assembled by the scanner's software, and the data will be decoded if all bar
code proofing requirements are met.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
050001(CR)
MSI Stitching = Enable
246
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
050000(CR)
MSI Stitching = Disable
MSI Stitching
Magellan™ 3450VSi