Micro Qr Code Length 1, Length 2 Programming Instructions - Datalogic Magellan 3450VSi Product Reference Manual

Micro QR Code Length Control

Micro QR Code Length 1, Length 2 Programming Instructions

If Micro QR Code Length Control is set to Fixed-Length decoding, this feature
specifies Micro QR Code first fixed length. If Micro QR Code Length Control is
set to Variable-Length decoding, this feature specifies the minimum label
length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the bar code,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
Default setting for this feature = 0001
042C(CR)
Set Micro QR Code Length 2
Product Reference Guide
Length 1 is the minimum label length if in variable length
mode, or the first fixed length if in fixed length mode. Length 2
is the maximum label length if in variable length mode, or the
second fixed length if in fixed length mode. Length includes
NOTE
the bar code' s data characters only. Any value > 3700 will be
considered to be 3700.
Set Aztec Length 1 on page 280
Length 2 on page 277
on this and the facing page to ensure that the scanner reads only the bar
code you intend to scan.
that represent the desired label length. The selectable range for this
option is 0001 to 3700. Pad all numbers with leading zeros to yield a four-
digit entry (0001-3700).
gramming Mode bar code.
below. You'll need to cover any unused bar codes
Alpha-Numeric Keypad in Appendix C
042B(CR)
Set Micro QR Code Length 1
Default setting for this feature = 0E74
Enter/Exit Programming Mode
or Set Micro QR Code
277