Data Matrix Length Control; Configuring Variable Length Decoding - Datalogic Magellan 3450VSi Product Reference Manual

Data Matrix Length Control

Data Matrix Length Control
Fixed Length Decoding —
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
ner will decode a ar code if the label length falls in the range of the configurable
minimum and maximum length.
Configuring Fixed Length Decoding:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the ENTER/EXIT Programming Mode bar code.
4. Set Length 1 to the first fixed length using the
5. Set Length 2 to the second fixed length (or to '0000' if there is only one

Configuring Variable Length Decoding:

1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the ENTER/EXIT Programming Mode bar code.
4. Set Length 1 to the minimum length using the
5. Set Length 2 to the maximum length using the
DEFAULT
010201(CR)
Data Matrix Length Control = Fixed Length
Product Reference Guide
When fixed length decoding is enabled, the scanner
Length 2 Programming Instructions on page 260
fixed length) using the
Instructions on page
Length 2 Programming Instructions on page 260
Length 2 Programming Instructions on page
When variable length decoding is enabled, the scan-
Data Matrix Length 1, Length 2 Programming
260.
010200(CR)
Data Matrix Length Control = Variable Length
Enter/Exit Programming Mode
Data Matrix Length 1,
that follow this page.
Data Matrix Length 1,
that follow this page.
Data Matrix Length 1,
260.
259