Usb Keyboard Intercharacter Delay - Datalogic Magellan 3450VSi Product Reference Manual

USB Keyboard Features

USB Keyboard Intercharacter Delay

Specifies a time delay between characters.
To set this feature:
1. Scan the Set USB Keyboard Intercharacter Delay bar code below.
2. Scan the appropriate characters/digits from the
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
Product Reference Guide
Appendix C that represent the desired delay. The selectable range for this
option is any decimal value from 00 (no delay) to 99 in 10 ms increments.
A table containing the ASCII Character Set and their corresponding decimal
values is available in the inside back cover of this manual. ASCII parame-
ters must be input by scanning decimal digits for each character. Pad all
single digit numbers with leading zero to yield a two-digit entry (00-99).
Thus, to set an intercharacter delay of 70ms, bar codes containing the
digits '0' and '7' must be scanned.
gramming Mode bar code.
Enter/Exit Programming Mode
Alpha-Numeric Keypad in
0287(CR)
Set USB Keyboard Intercharacter Delay
Default setting for this feature is: 01 (10ms)
95