Indicate Transmission Failure - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode
RS-232 Indicate Transmission Failure
This feature enables / disables the ability of the scanner to sound a bad label
beep indication when a transmission failure occurs.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the desired option from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
032201(CR)
RS-232 Indicate Transmission Failure = Enable
76
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
RS-232 Indicate Transmission Failure
032200(CR)
RS-232 Indicate Transmission Failure = Disable
DEFAULT
Magellan™ 3450VSi