DataBar Expanded Length Control
NOTE
Product Reference Guide
This feature specifies either variable-length or fixed-length decod-
ing for DataBar Expanded.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to
cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
You must now set the features DataBar Expanded Length 1 on page
356
and DataBar Expanded Length 2 on page 357 .
DataBar Expanded LENGTH CONTROL = VARIABLE-LENGTH
DataBar Expanded LENGTH CONTROL = FIXED-LENGTH
DataBar Expanded Enable
355