Programming; Using The Programming Bar Codes; Resetting The Standard Product Defaults; Data Matrix Programming Labels - Datalogic Magellan 3200VSi Product Reference Manual

Getting Started
BEEPER FUNCTIONS
BEEPER
INDICATION

Programming

Varies depending upon the fea-
Mode
ture(s) being configured.
Indications
Programming
The scanner is typically factory-configured with a set of default features standard to the interface
type you ordered. After scanning the interface bar code from the
tion, you can select other options and customize your scanner through use of the instructions
and programming bar codes available in that section and also the
chapters of this manual.

Using the Programming Bar Codes

This manual contains feature descriptions and bar codes which allow you to reconfigure your
scanner. Some programming bar code labels, like the label below for resetting defaults, require
only the scan of that single label to enact the change. Most of the programming labels in this
manual, however, require the scanner to be placed in Programming Mode prior to scanning
them. Scan a START/END bar code once to enter Programming Mode. Once the scanner is in
Programming Mode, you can scan a number of parameter settings before scanning the START/
END bar code a second time, which will then accept your changes, exit Programming Mode
and return the scanner to normal operation.

Resetting the Standard Product Defaults

If you are unsure of what programming options are in your scanner, or you've changed some
options and want the factory settings restored, scan the Standard Product Default Settings bar
code below. This will copy the factory configuration for the currently active interface to the cur-
rent configuration.
The programming section lists the factory default settings for each of the menu commands for
the standard RS-232 interface in
tings for the other interfaces can be found in

Data Matrix Programming Labels

Some scanners can be configured using Data Matrix programming labels. This feature is ONLY
available for scanners with 2D capability.
Contact Technical Support to request Data Matrix programming labels.
8
INDICATION
Standard Product Default Settings
BOLD
COMMENT
The Beeper will sound as programming bar code labels are
scanned, indicating progress during scanner configuration.
text on the following pages. Exceptions to default set-
Appendix D, Factory Default Settings
Interface Related Features
and
Data Editing Symbologies
.
Magellan TM 3200VSi
sec-