ENTER/EXIT PROGRAMMING MODE
Data Matrix Length Control
Fixed Length Decoding:
barcode if the label length matches one of the configurable fixed lengths.
Variable Length Decoding:
decode a ar code if the label length falls in the range of the configurable minimum and max‐
imum length.
Configuring Fixed Length Decoding:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the Fixed Length Decoding barcode.
3. Scan the Enter/Exit Programming Mode barcode at the top of the page.
4. Set Length 1 to the first fixed length using the
ming Instructions on page 261
5. Set Length 2 to the second fixed length (or to '0000' if there is only one fixed length)
using the
Configuring Variable Length Decoding:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the Variable Length Decoding barcode.
3. Scan the Enter/Exit Programming Mode barcode at the top of the page.
4. Set Length 1 to the minimum length using the
ming Instructions on page 261
5. Set Length 2 to the maximum length using the
gramming Instructions on page 261
DEFAULT
010201(CR)
Data Matrix Length Control = Fixed Length
260
MAGELLAN™ 1500I
When fixed length decoding is enabled, the scanner will decode a
When variable length decoding is enabled, the scanner will
that follow this page.
Data Matrix Length 1, Length 2 Programming Instructions on page 261
that follow this page.
Data Matrix Length 1, Length 2 Program-
Data Matrix Length 1, Length 2 Program-
Data Matrix Length 1, Length 2 Pro-
.
010200(CR)
Data Matrix Length Control = Variable Length
.