Cbx100/Cbx500 Pinout For Matrix 300N - Datalogic Matrix 300N Series Product Reference Manual

RAPID CONFIGURATION

CBX100/CBX500 Pinout for Matrix 300N

The table below gives the pinout of the CBX100/CBX500 terminal block connectors. Use
this pinout when the Matrix 300N reader is connected by means of the CBX100/
CBX500:
CBX100/500 Terminal Block Connectors
Input Power
Vdc Power Supply Input Voltage +
GND Power Supply Input Voltage -
Earth Protection Earth Ground
Inputs
+V Power Source - External Trigger
I1A External Trigger A
I1B External Trigger B
-V Power Reference - External Trigger
+V Power Source - Inputs
I1A Input 2 A
(polarity insensitive)
I2B Input 2 B
(polarity insensitive)
-V Power Reference - Inputs
Shield
Shield Network Cable Shield
Main Interface
RS232
TX
-
RX
-
SGND
a. Do not leave floating, see RS232 Interface for connection details
CAUTION
2
MATRIX 300N
(polarity insensitive)
(polarity insensitive)
Do not connect GND, SGND and REF to different (external) ground refer-
ences. GND, SGND and REF are internally connected through filtering cir-
cuitry, which can be permanently damaged if subjected to voltage drops
over 0.8 Vdc.
Outputs
+V Power Source - Outputs
-V Power Reference - Outputs
O1+ Output 1+
O1- Output 1-
02+ Output 2+
O2- Output 2-
O3A Output 3 (CBX500 only)
Auxiliary Interface
TX
RX
SGND
ID-NET™
REF Network Reference
ID+ ID-NET network +
ID- ID-NET network -
RS422 Full-Duplex
TX+
TX-
a
RX+
*RX-
SGND