Cbx100/Cbx500 Pinout For Matrix 120 - Datalogic Matrix 120 Product Reference Manual

Rapid Configuration

CBX100/CBX500 Pinout for Matrix 120

The table below gives the pinout of the CBX100/CBX500 terminal block
connectors. Use this pinout
CBX100/CBX500 by means of the CAB-1011 accessory cable:
Input Power
Vdc Power Supply Input Voltage +
GND Power Supply Input Voltage -
Earth Protection Earth Ground
Inputs
+V Power Source - External Trigger
I1A External Trigger A
I1B External Trigger B
-V Power Reference - External Trigger
+V Power Source - Inputs
I1A Input 2 A
I2B Input 2 B
-V Power Reference - Inputs
Shield
Cable shield connected to chassis and 17-pin con-
nector shell
RS232
a. Do not leave floating, see RS232 Interface for connection details
Do not connect GND and SGND to different (external) ground references. GND and
SGND are internally connected through filtering circuitry, which can be permanently
damaged if subjected to voltage drops over 0.8 Vdc.
CAUTION
4
CBX100/500 Terminal Block Connectors
(polarity insensitive)
(polarity insensitive)
(polarity insensitive)
(polarity insensitive)
Main Interface
TX
RX
-
-
SGND
only when the Matrix 120 reader is connected to the
+V Power Source - Outputs
-V Power Reference - Outputs
O1+ Output 1+
O1- Output 1-
02+ Output 2+
O2- Output 2-
O3A Output 3 (CBX500 only)
Auxiliary Interface
Matrix 120 has no Auxiliary Interface
Matrix 120 has no ID-NET Interface
RS422 Full-Duplex
Outputs
ID-NET™
TX+
a
RX+
a
TX-
RX-
SGND
Matrix 120