3.3
Transient Transmission
This function is used for data communications at any timing and has the following three types.
Page 37 Communications using a dedicated instruction
Page 37 Communications using the SLMP
Page 38 Communications using the engineering tool
The Motion module can communicate only in the same network.
3
Communications using a dedicated instruction
This type of the data communication is used to read/write data from the master station to the remote station using the
dedicated instructions.
For dedicated instructions that can be used and details on dedicated instructions, refer to the following.
Page 119 DEDICATED INSTRUCTION
Ex.
Reading objects from a remote station using the dedicated instruction (SLMPSND instruction)
Master station
Remote station
CPU module
1
Command
SLMPSND
3
2
Device
Object
1234H
1234H
Communications using the SLMP
This type of the data communication is used to read/write data of the master station and the remote station from the external
device, such as a personal computer or HMI (Human Machine Interface), via an SLMP.
The Motion module sends and receives SLMP messages. For details on SLMP, refer to the following.
MELSEC iQ-F FX5 User's Manual (SLMP)
Send and receive
Send and receive
of SLMP messages
of SLMP messages
Ethernet
Precautions
For SLMP communications, set the same communication speed for the connected station and access destination. If the
communication speed differs between the connected station and access destination, SLMP communications may not be
performed.
3 FUNCTIONS
37
3.3 Transient Transmission