Table of Contents
Advertisement
25
Waveforms Menu
Introduction
The Waveforms menu controls how the oscilloscope displays the
waveforms. The waveforms may be displayed in normal, averaged, or
accumulated mode. This menu also controls the connect-the-dots
display feature. The default Display menu is shown in figure 25-1.
LScDOeJ-
mvltr
OfA
Cluto-kasure
l'larker
s [
Off
1
Display
1
NOfmOl
1
Connect
dolsl]
Sample
per1013
- --
s/Dlv
11
Delay
I
Grid
1-j
Figure
25-l.
Waveforms Display Menu
Scope Field
The Scope field located in the upper left corner of the menu is used for
accessing the System Configuration menu, any assigned analyzers, and
the mixed mode display operation. More information on mixed mode
displays and the system configuration menu is found in the appropriate
chapters.
-
Auto-Measure
Field
Automatic parametric measurements are functions built into the
digitizing oscilloscope that make parametric measurements on a
displayed waveform.
HP 16528/1653B
Waveforms Menu
Front-Panel Reference
25-l
Advertisement
Chapters
Table of Contents
