HP 1652B Getting Started Manual page 595

Hide thumbs Also See for 1652B:

Table of Contents

4. In the State Format Specification

assign the Clock Period to > 60 ns. Also

assign the lower 8 channels of the pod under test to a label as shown in

3-6. If you are testing the HP 1652B, assign the falling edge of the L clock for

all pods. If you are testing the HP 1653B, assign the falling edge of the J

clock for all pods. Refer to steps a through c if you are unfamiliar with the

Cl ock Period

Figure 3-6. Format Specification

for Data Test 1

a. Press the front-panel FORMAT/CHAN

b. Move the cursor to Clock field. Then use the cursor and SELECT

key to assign the falling edge of the appropriate clock as in figure 3-7.

Figure 3-7. Clock Assignment

for Data Test 1

HP 1652B/1653B

Service Manual

Chapters

Table of Contents