Installation, Maintenance And Calibration; Operating Environment; Ventilation; Storage And Shipping - HP 1652B Getting Started Manual

Operating
You may operate your logic analyzer in a normal lab or offke type
Etkirokent
environment without any additional considerations. If you intend to use
--
it in another type of environment, refer
to Appendix
F
for complete
operating environment specifications. Note
the humidity
limitation.
Condensation within
the
instrument cabinet can cause poor operation
or malfunction. Protection should be provided against temperature '
extremes which cause condensation.
Ventilation You must provide an unrestricted airflow for the fan and ventilation
openings in
the
rear of
the
logic analyzer. However, you may stack the
logic analyzer under, over, or in-between other instruments as long the
surfaces of
the
other instruments are not needed for
their
ventilation.
Storage and
Shipping
Tagging for
Service
Original
Packaging
This instrument may be stored or shipped in environments within the
following limitations:
l
Temperature: - 40 O C to + 75 O C
l
Humidity: Up to 90% at 65 O C
l
Altitude: Up to 15,300 metres (50,000 feet)
If
the
instrument is to be shipped to a Hewlett-Packard office for
service or repair, attach a tag to the instrument identifying owner
address of owner, complete instrument model and serial numbers and
a description of the service required.
If the original packaging material is unavailable or unserviceable
materials identical to those used in factory packaging are available
through Hewlett-Packard offices. If the instrument is to be shipped to a
Hewlett-Packard office for service, tag the instrument (see "Tagging for
Service"). Mark the container FRAGILE to ensure careful handling. In
any correspondence, refer to the instrument by model number and full
serial number. --
Installation, Maintenance and Calibration
D-2
HP 16528/1653B
Front-Panel Reference