HP 1652B Getting Started Manual page 101

General
Purpose General purpose probing involves connecting the logic analyzer and
Probing
oscilloscope probes directly to your target system without using any
interface. General purpose probing does not limit you to specific hook
up schemes, for an example, as the probe interface does.
The Termination
The optional termination adapter (HP part number
0165043201)
Adapter
allows you to connect the logic analyzer probe cables directly to test
ports on your target system without the probes. However, since the
probes contain the proper termination for the logic analyzer inputs, a
termination must be provided.
The termination adapter shown below, is designed to covet to a 20
(2x10) position, 4wall, low profile header connector, 3M Series 3592
or equivalent.
To hook up the adapter, connect the termination adapter to the
analyzer probe cable. Connect the other end of the adapter directly to
your test port.
_-
Figure
2-2.
Termination Adapter
HP 1652B/l653B
Probing
23 m