The Timing Waveforms Menu - HP 1652B Getting Started Manual

The Timing
Waveforms
Menu
The Timing Waveforms menu differs from the other menus you have
used so far in this exercise. Besides displaying the acquired data, it has
menu fields that you use to change the way the acquired data is
displayed and fields that give you timing answers. Before you can use
this menu to find answers, you need to know some of the special
symbols and their functions. The symbols are:
l
TheXandO
l
The V
l
The vertical dotted line
The X and 0
The X and 0 are markers you use to find your answer. You place them
on the points of interest on your waveforms, and the logic analyzer
displays the time between the markers. The X and 0 markers will be in
the center of the display when X to trig (ger) and 0 to trig (ger) are
both 0.000 s (see example below).
pEzzxq -
Timing Wsvef ems
barkers [ Time ] X to Trig 1-1 [Time X to 0 ] 0 s
Accumulate
I] 0 to Trig 1-1
fit l-1 [RASJ
TImeID Iv -1
0
Delay 71
11
Timing Analyzer Measurement Example
HP 1652B/16538
20-10
Front-Panel Reference
Figure 20-7. X &
0
Markers