HP 1652B Getting Started Manual page 196

At power up the State Format Specification menu looks Iike that shown
below:
L-2 - Sl8l8 rorrt
sp#lflcstl8n '
Clock
Clock PoriOd
l,60J
Pod 5
Actlvlty )
----w----e------
Label Pal IS.... 87 . ..I 0
CII +
l +*ooloB*+*+**+L
Figure 9-I. State Format Specification Menu
The State Format Specification menu for the HP 1653B is similar to
that for the HP 1652B except that Pod 2 appears in the menu instead of
Pod 5.
This menu shows only one pod assigned to each analyzer, which is the
case at power up. Any number of pods can be assigned to one analyzer,
from none to ail five for the HP 1652B, and from none to two for the
HP 1653B. In the State Format Specification menu, only three pods
appear at a time in the display. To view any pods that are off screen,
press the left/right ROLL key and rotate the KNOB. The pods are
always positioned so that the lowest numbered pod is on the right and
the highest numbered pod is on the left.
State Format Specification Menu HP 16528/16538
9-2
Front-Panel Reference