Alternate Printers; Hooking Up Your Printer - HP 1652B Getting Started Manual

Alternate Printers
In addition to HP printers, the logic analyzers support
Epson@
compatible RS-232C printers. These alternate printers must support
graphics.
When the logic analyzer's RS-232C configuration is s&t for alternate
printers, it transmits data to the printer in the Epson format.
Printers incompatible with either HP or Epson data transfer formats
will not work with the HP 1652B/1653B logic analyzers.
Hooking Up
Your Printer
If your printer is already connected to the logic analyzer, skip to
"Setting the RS-232C for HP Printers" or "Setting the HP-IB for HP
Printers" in this chapter. Otherwise hooking up your HP printer is just
a matter of having the correct HP-IB or RS-232C interface cable. Refer
to the figure below.
Figure 7-l.
Logic Analyzer to Printer Hook-up
The type of connector on the printer end of the interface cable is
determined by the kind of printer.
Ma king Hardcopy Prints HP 16528/1653B
7-2
Front-Panel Reference