Sample Period Display; Time - HP 1652B Getting Started Manual

Hide thumbs Also See for 1652B:

Table of Contents

The default selection for the Markers field is Off.

Sample Period

Any time the Markers field is Off, the sample period of the acquired

waveform is displayed directly below the markers field.

period is the time period between acquired sample points and is the

inverse of sample rate (digitizing rate). Sample period is a function of

sweep speed and can only be changed by changing the s/Div field.

When the Time field is selected from the Markers pop-up, the

Sample period =-

disappears and a new middle row of fields appear

Waveforms Menu

in the Waveforms menu. See figure

Figure 2541.

Time Markers Field Pop-up

X to 0 Field

The X to 0 field is located on the left side of the middle row of fields

and displays the time (delta time) between the X marker and the 0

marker. When the X to 0 field is selected, turning the knob will move

both the X and the 0 marker across the display without changing the

value in the X to 0 field. However, the values in the Trig to X and Trig

to 0 fields will change to reflect the movement of the X and 0 markers.

HP 1652B/1653B

Front-Panel Reference

Chapters

Table of Contents