Table of Contents
Advertisement
Type PoPuP
Type
The arrows in the pop-up move the underscore marker forward or
backward. To move the marker forward, position the cursor over the
right-pointing arrow and press SELECT. To backspace the marker
position the cursor over the left-pointing arrow and press SELECT.
You can also move the underscore marker with the ROLL keys and the
KNOB. Pressing the left/right ROLL key activates the marker.
Rotating the KNOB places the marker under the desired character.
You can replace a character with a space in one of two ways. Position
the cursor over the space in the pop-up and press SELECT, or press
the DON'T CARE key on the front panel.
If you want to erase the entire entry and place the underscore marker
at the beginning of the name box, press the CLEAR ENTRY key on
the front panel. When you have entered the correct name, position the
cursor over Done and press SELECT.
-
The Type field defines the machine as either a state analyzer or a
timing analyzer. When this field is selected, a pop-up selector menu
appears. You choose the machine type by using the KNOB to move the
cursor within the menu to the desired selection and pressing SELECT.
-
Systa
Conflgufrtion
----------------
Pod
4
7
----------------
Figure d-3. Type Pop-up Menu
System Configuation Menu
4-4
HP
16526/16538
Advertisement
Chapters
Table of Contents
