Scope On/Off; Autoscale - HP 1652B Getting Started Manual

,-
Scope On/Off Th
e scope defaults to Off. To turn the scope on or off, simply move the
cursor over the On/Off field and press select. Scope measurement may
be added to any analyzer co&guration.
Autoscale
Autoscale provides a starting point for setting up a measurement. The
Autoscale field appears for the timing analyzer in the System
*
Configuration menu only. When you select Autoscale, a pop-up
appears with two options: Cancel and Continue. If you select Cancel,
the autoscale is cancelled and control is returned to the System
Configuration menu.
HP
16528/16538
Front-Panel Reference
Syr tr Coal lQrr8 urn
I
aro1ytor 2
Nemo, I-1
Autoscale Popup
Figure 4-d. Autoscale Pop-up Menu
If you choose Continue, autoscale configures the Timing Format, Trace
Specification, and the Timing Waveforms menus. Autoscale searches
for channels with activity on the assigned pods and displays them in the
Waveforms menu.
Autoscale for the scope is located in all main menus. When Continue is
selected, the Channel, Trigger, and Waveforms displays are
automatically configured. More information on scope autoscale is
located in chapter 23, "Channel Menu."
System Configuation Menu
4-5