Mixed Mode Displays; Introduction - HP 1652B Getting Started Manual

Logic
Hide thumbs Also See for 1652B:
Table of Contents

Advertisement

26
-
Mixed
Mode Displays
Introduction
This chapter explains mixed mode displays for:
0
timing/state
l
state/state
l
timing/scope
0
state/timing/scope
The Mixed Mode waveform display will display all of the above
mentioned combinations. The main menu and field definitions for each
individual type of display is explained in their respective chapters.
Only the unique functions and features of the mixed mode displays are
given here.
Mixed Mode field
The Mixed Mode field is located in the same pop-up that is used to
access the System Configuration menu, analyzers and the scope. See
figure 26-l. The Mixed Mode field will only be available from the
Waveform and Listing menus.
Before mixed mode displays can be displayed, the appropriate
analyzers and/or scope must be turned on and the appropriate
channels or Dad bits assigned.
HP 16526/53B
Front-Panel Reference
( flu to-tteasur
e )
[]
Connect
dots
I]
I
Grid
piiq
Mixid Mode field
pop-up
,
Figure 26-l.
Mixed Mode Field
Mixed
Mode Displays
2&l

Advertisement

Table of Contents
loading

This manual is also suitable for:

1653b

Table of Contents