HP 1652B Getting Started Manual page 95

Key Features
A 35inch disk drive is built into the instrument for storing logic
analyzer and oscilloscope configurations and acquired data. The disk
drive also provides a way of loading inverse assembly configuration
files into the logic analyzer for easy configuring. Some common
features of the logic analyzer and oscilloscope include lightweight
passive probes for easy hook-up, mixed-mode display, HP-IB and
RS-232C interfaces for programming and printer output.
Logic analyzer key features include:
Transitional timing for extended timing analyzer memory.
All channels can be used for state or timing.
An external trigger BNC connector.
Transitional or glitch timing modes.
1
k deep memory on all channels.
Glitch detection.
Marker measurements.
Triggering and pattern qualification.
Overlapping of timing waveforms.
Eight sequence levels.
Eight pattern recognizers.
One range recognizer.
Time and number-of-states tagging.
Pre-store.
Autoscale.
Programmability.
Cross-domain triggering.
Interactive measurements.
Oscilloscope-type controls in the timing analyzer.
State Compare, Chart, and Waveform modes.
Oscilloscope key features include:
l
400 Megasample/second digitizing rate.
l
100
MHz single-shot (real-time) bandwidth.
l
4 ksamples per measurement per channel.
l
Automatic waveform scaling.
General Information
l-4
HP
16528/16538
Front-Panel Reference