Other Packaging
The following general instructions should be followed for repacking
with commercially available materials.
a. Wrap the instrument in heavy paper or plastic.
b. Use a strong shipping container. A double-wall carton made of
350 lb. test material is adequate.
c. Use a layer of shock-absorbing material 70 to 100 mm (3 to 4
inches) thick around all sides of the instrument to firmly cushion
and prevent movement inside the container. Protect the control
panel with cardboard.
d. Seal the shipping container securely.
e. Mark the shipping container FRAGILE to ensure careful handling.
f. In any correspondence, refer to the instrument by model number
and full serial number.
Power
Requirements
The HP 1652B/53B requires a power source of either 115 or 230 Vat
-22% to + 10%; single phase, 48 to 66 Hz; 200 Watts maximum
power.
HP
16526/16538
Installation,
Maintenance
and Calibration
Front-Panel Reference
D-3