Accumulate Mode; Connect Dots Field; Grid - HP 1652B Getting Started Manual

f--
To exit the Average mode, select the AVG# field next to the Average
Integer field. The default value for the Average # field is 8.
Accumulate Mode
In Accumulate mode, the oscilloscope accumulates all waveform
acquisitions on screen without erasing the previously acquired
waveforms. This is similar to infinite persistence on an analog storage
oscilloscope. These acquisitions will stay on the display until Mode is
changed, or until the waveform is adjusted by a control that causes the
display to change, such as s/Div or V/Div.
Connect Dots
Field
The Connect dots field is located on the right side of the top row of
fields. When Connect dots field is selected, it will toggle between on
and off.
When Connect dots is On, each displayed dot will be connected to the
adjacent dot by a straight line. A waveform with Connect Dots set to
On, will be well defined and easier to see.
The default setting for the Connect dots field is Off.
Grid
When the Grid field is selected, it will toggle between on and off.
When the grid is turned on, the major divisions for both time and
voltage will be marked with dotted lines.
HP 16528/1653B
Waveforms Menu
Front-Panel Reference
25-31