Connecting
the
At this point, if you had a target system with a 68000 microprocessor,
Probes
you would connect the logic analyzer to your system. Since you will be
assigning labels ADDR and DATA, you hook the probes to your
system accordingly.
l
Pod
1
probes 0 through 15 to the data bus lines DO through
DE
l
Pod 2 probes 0 through 15 to the address bus lines A0 through Al5
l
Pod 3 probes 0 through 7 to the address bus lines Al6 through A23.
l
Pod 1, CLK ( J clock) to the address strobe (LAS).
Activity Indicators
When the
logic
analyzer is connected and your target system is running,
you will see Activity Indicators in
the Pod
1,2,
and 3 fields of the
System Configuration menu. This indicates which signal lines are
Activity
transitioning.
Egrla
Configuration
Analyzer 1
Name1 [EiEMiiFl
cl
Qpe
1-j
Analynr
2
cl
Type: (71
Figure 15-2. Activity Indicators
State Analyzer Measurement Example
15-6
HP 16528/1653B
Front-Panel Reference