HP 1652B Getting Started Manual page 320

Leaving the
Symbol Table
Menu
You can specify ranges that overlap
Don't cares are not allowed.
or are
within each other.
To add more symbols to your symbol table, place the cursor on the last
symbol defined and press SELECT. A pop-up menu appears as shown.
Figure
17-W.
Symbol Pop-Up Menu
The first option in
1
:he pop-up is Modify symbol. If you select this
option, you will see an Alpha Entry pop-up menu with which you can
change the name of the symbol.
The second option in the pop-up is Insert new symbol. It allows you to
specify another symbol. When you select it, you will see an Alpha Entry
pop-up menu. Use the menu and the keypad on the front panel to enter
the name of your new symbol. When you select Done, your new symbol
will appear in the Symbol Table. The third option in the pop-up is
Delete symbol. If you select this option, the symbol will be deleted from
the Symbol Table.
When you have specified all your symbols, you can leave the Symbol
Table menu in one of two ways. One method is to place the cursor on
the Done field and press SELECT. This puts you back in the Format
Specification menu that you were in before entering the Symbol Table.
The other method is to press the FORMAT, TRACE, or DISPLAY
keys on the front panel to get you into the respective menu.
Timing Format Specification Menu
17-12
HP 16528/1653B
Front-Panel Reference