Table of Contents
Advertisement
When you select the Armed by field, a pop-up menu appears like that
shown below. The first two options always appear in the pop-up. The
third and fourth options will give the name of the other analyzer and
scope. If the other analyzer or scope is off, or if the other machine or
scope is being armed by this machine, these options will not be
available.
Armed by
Figure 1048. Armed By PopUp Menu
Branches
The
Branches
field allows you to configure the sequencer of the state
analyzer to branch from one sequence level to another with secondary
branching qualifiers, or to restart when a certain condition is met.
Selecting this field gives you the following pop-up menu.
Branches
Figure W-19. Branches Pop-Up Menu
State Trace Menu
10-14
If you select Off, all secondary branching qualifiers are deleted from
the sequence levels. Only the primary branches remain.
The Restart option allows you to start over from sequence level 1 when
a specified condition is met. This can be handy if you have code that
branches off in several paths and you want the analyzer to follow one
certain path. If the analyzer goes off on an undesired path, you would
want the analyzer to stop and go back to the beginning and take the
correct path.
HP 16528/16538
Front-Panel Reference
Advertisement
Chapters
Table of Contents
