Table of Contents
Advertisement
The first of these fields defines the symbol as either a Pattern or a
Range. If you place the cursor on this field and press SELECT, it will
toggle between Pattern and Range.
When the symbol is defined as a pattern, one field appears to specify
what the pattern is. Selecting this field gives you a pop-up with which
you can specify the pattern. Use the keypad and the DON'T CARE key
on the front panel to enter the pattern. Be sure to enter the pattern in
the numeric base that you specified in the Base field.
[yt;ify
Pattern:
]
Figure
949.
Specify Pattern Pop-Up Menu
If the symbol is defined as a range, two fields appear in which you
specify the upper and lower boundaries of the range.
tmCHIW
1 - S@ml
Table
( Dkne )
Label
-1
Base
[Hexadecimal
1
Symbo I
vteu
size
[T]
Figure
9-20.
Symbol Defined as a Range
Selecting either of these fields gives you a pop-up with which you can
specify the boundary of the range.
Figure
9-21.
Specify Range Pop-Up Menu
You can specify ranges that overlap or are nested within each other.
Don't cares are not allowed.
State Format Specification Menu
9-16
HP 16528/1653B
Front-Panel Reference
'
Advertisement
Chapters
Table of Contents
