HP 1652B Getting Started Manual page 216

.-
To specify a pattern to be used in the combination, place the cursor on
the pattern recognizer field and press SELECT. The field toggles from
Off to On and a connection is drawn from the pattern field to the gate.
In figure
10-5,
patterns b, c and d and the range are ORed together,
and e and g are ANDed together.
Full
Qua 1 if ier Specification
a
b
c
d
range
Figure
10-5.
Patterns Assigned for Logical Combinations
& shown in the previous figures, the range is included with the first
group of patterns (a-d). If you select the range field, you will see the
following pop-up menu.
1
x
2
I
Full Qualifier Specification (Done)\:
6
b
C
d
range
Figure 10-6. Range Specification Pop-Up Menu
HP
16526/16538
State Trace Menu
Front-Panel Reference
lo-5