Chapter 4: Analyzing the CPU32 with a Logic Analyzer
Logic Analyzer Configuration
Logic Analyzer Configuration
The following sections describe the logic analyzer configuration as set
up by the configuration files.
Trigger specification
The trigger specification is set up by the software to store all states. If
you modify the trigger specification to store only selected bus cycles,
incorrect or incomplete disassembly may be displayed.
Format menu
This section describes the organization of CPU32 signals in the logic
analyzer's Format menu.
The configuration software sets up the analyzer format menu on the
analyzer. The figure on the following page shows the Format menu for
the CPU32.
The configuration files contain predefined format specifications. These
format specifications include all labels for monitoring the
microcontroller. The tables on the following pages show the signals
used in the STAT label and the predefined symbols set up by the
configuration files.
Do not modify the ADDR, DATA, or STAT labels in the format
specification if you want inverse assembly. Changes to these labels may
cause incorrect or incomplete inverse assembly.
92
Solutions for CPU32