Duplicate Disk - HP 1652B Getting Started Manual

Duplicate Disk
The Duplicate Disk operation allows you to duplicate all the files on
one disk to another. When you select this option, only the operations
field appears in the top section of the Disk Operations menu. The disk -
is automatically formatted in this operation.
Disc DDorotloar
aiia
Figure W. Duplicate Disk Operation
When you select Execute, you will see a pop-up with a message telling
you what occurs when a disk is duplicated. The pop-up also contains
two fields: Cancel and Continue. Cancel stops the duplicating process
and returns you to the Disk Operations menu. Continue executes the
operation. If you select Continue, the display goes blank except for the
message "Insert source disk - hit select when ready." Insert the disk you
want to duplicate and press SELECT. After the logic analyzer reads
the disk, it displays the message "Insert destination disk - hit select.
when ready." Insert the disk to which you want to copy and press
SELECT. The analyzer will tell you that it's writing to the disk.
Figure
5-8.
Duplicate Disk Pop-up Menu -
The process of duplicating a disk is an iterative one; i.e., more than one
swapping of disks may be necessary before all files are transferred. If
this is the case the logic analyzer will repeat the message telling you to
insert the source disk. Insert the source disk and press SELECT. The
analyzer remembers where it stopped duplicating the first time and
starts reading from that location. When the analyzer is ready, insert the
destination disk and press SELECT. You will never have to swap disks
-\
more than three times.
I/O Menu
HP
16528/16538
S-8
Front-Panel Reference