HP 1652B Getting Started Manual page 310

At power up the Timing Format Specification menu
looks like
that
shown below:
-
(nCltHINE1 -
Tiaing Fomt Sgmcificmtion
Act1v1
Label
POD I
-off-
-off-
-off-
-off-
-off-
-off-
-ofr-
-off-
-off-
-off-
-off-
+lff-
-off-
tu '
Pol
El
Figure
17-l.
Timing Format Specification Menu
The Timing Format Specification menu for the HP 1653B is similar to
that for the HP 1652B except that Pod 2 appears in the menu instead of
Pod 5.
This menu shows only one pod assigned to each analyzer, which is the
case at power up. Any number of pods can be assigned to one analyzer,
from none to all five for the HP 1652B, and from none to two for the
HP 1653B. In the Timing Format Specification menu, only three pods
appear at a time in the display. To view any pods that are off screen,
press the left/right ROLL key and rotate the KNOB. The pods are
always positioned so that the lowest numbered pod is on the right and
the highest numbered pod is on the left.
Timing Format Specification Menu
17-2
HP 16528/1653B
Front-Panel Reference